How to Replace the Replacement Key Battery For the Saab 9-3
Saab owners have a distinct set of steps to add another key. This requires a handheld computer, called Tech-2, to be used by the dealer. Then the transponder must be replaced and a key have to be purchased.
It is a good idea to rotate your keys so that one doesn't wear out more quickly than the other. This will help keep your keys in pristine condition.
Replacement Case
The new key fobs aren't like the older Saab keys. They feature electronic components which make it hard to copy. This has made car theft much more difficult than twenty years ago. It has also made it more costly to replace keys that were lost.
Saab 9-3 owners must have two keys working. It's expensive to replace a lost key as it requires replacing the CIM module, as well as reconfiguring the locking cylinders. Dealers typically charge between $100 and $200 for this.
There are ways to reduce these high cost. Some parts providers will use the code of an old key to cut a new metal blade at a fraction the cost of the dealer. saab replacement keys , however, must be identical to the original to work correctly in your vehicle.
You can also change the case yourself by following these steps. You'll require a flathead screwdriver as well as some patience. With the screwdriver, you can pry apart the plastic, and then take off the emergency key. Once the case is opened, take out the electronics and place them into the new case. Place the key with the correct badge into the case.
Replacement Battery
The Saab 9-3 replacement battery is a cheap part that can be easily and quickly replaced. This YouTube tutorial for DIY user Cyclone Cyd explains how to replace the battery of the remote key fob in only four steps. This tutorial is suitable for any modern saab key fob although the process might differ slightly.
The first step is to locate the button that releases the backup key on the fob. This is usually located next to the Saab logo on the back of the fob. Use a flathead to insert the screwdriver through the small hole in this button. This should be sufficient to let the fob case open so that you can change the battery.
Once the new CR1632 battery is in place it is possible to reassemble the remote key fob. You can then program it to your car. The whole process should not take more than one hour. It's a very easy procedure that doesn't require any special tools.
If you lose your key, the process will be more complicated but it is still able to be done. The dealer will first need to read the VIN of the vehicle, and then purchase the replacement TWICE module as well as key blade with the correct unique code. After that, they'll need to cut the replacement key and then program it with a new software tool called MDI.
Replacement Key Fob
The key fob is the device that locks and unlocks your car, it has an internal battery. The batteries are able to last for and eventually go out of service. This is a problem that affects all cars and the good news is that you can change the batteries in a majority of key fobs and not have to replace the entire case. You can buy replacement fobs on Amazon that come with all the electronic components already installed, which means you can simply open the case and replace the batteries in the original case. You will need to remove the emergency key before you replace the batteries. To do this, place a small flathead screwsdriver into the slot in the middle. Use the screwdriver to move around the case, and it should split open, making it simple to take it out.
If you're planning to replace your keys, keep a spare in your possession. This will save you a significant amount of money. If you do have a spare, you can request that the dealer cut a new key and program it to the car, which is cheaper than replacing the entire key fob.
If you do not have a spare key one, you can add another key to your car, however this will require a lot of research and effort. The cost for adding a second key is about a few hundred dollars and it requires programming of the car's computer. Professionals can do this, but it's an expensive option.
Replacement Ignition
The new SAAB 9-3 has a more sophisticated alarm system based on a key code. This means that when you lose your sole working key, acquiring another one can be very expensive since the car has to have a computer module added and it must also be programmed to accept an additional key. Most locksmiths cannot do this or even dealers can charge several hundred dollars just to program the new key!
If you've lost your sole working key and a dealer is able to replace the computer in your car (known as the CIM or SAAB TWICE) to create an exchange, and they will charge you a premium price for it. We can reprogram the current EEPROM inside your car's computer so that it is ready for an extra key. This will save you more than 50% off the price you'd pay the dealer.
If you've owned a car like the SAAB 9-3 for quite a while, you know that the ignition keys are not very durable. They can be extremely sticky, and the buttons are known to be removed from them every now and then which is why you should think about replacing your ignition key if it isn't working as it should. It's not as difficult as it seems to replace the ignition key. With the right tools, it can be accomplished in a matter of minutes.